Join the Scena beta.

Thank you for helping test Scena. Beta builds change often and will have rough edges, so please do not rely on them yet. Your reports are how it gets better. The beta is by invitation: ask for yours in the iPhone and iPad section below. Once you are approved, everything takes about ten minutes.

Our promise to beta testers. Everyone who joins the beta keeps their account when it ends. It becomes a full account with Scena Vision for the life of the account, at no charge. This covers Scena Vision, not Scena Vision-X. It stays with your account and cannot be transferred or exchanged for money, and the account must follow our terms.
1. Server

Scena has two parts. The server runs on the computer that holds your films. Install it first (Windows or Mac below).

2. App

The app goes on your iPhone, iPad or LG TV and connects to your server.

3. Tell us

Found something wrong? Post it in the Beta testing section of the forum.

Beta downloads

The server installers and the LG TV app are for approved testers. When you are approved we email you a link to create your Scena account. Sign in with that account to see the downloads. Not invited yet? Request an invite in the iPhone and iPad section below.

Loading…

Install it

iPhone and iPad

What you need: an iPhone or iPad on iOS 15 or later, and the free TestFlight app from the App Store (get TestFlight). No developer account and nothing to pay. Any Apple ID works, and it does not need to match the email below.

It takes about a minute. We use your answers only to choose testers and to test on the devices you own.

  1. Press Request a place in the beta, answer a few questions and send it. We approve each request by hand. When yours is approved you get an email from us with a link to create your Scena account (it only works for your email address), and Apple's TestFlight invitation follows within a few minutes. Check junk.
  2. Install TestFlight from the App Store, if you do not have it.
  3. Open Apple's invitation email on your iPhone or iPad and tap View in TestFlight (or Start testing).
  4. Tap Accept, then Install. Scena appears on your Home Screen with an orange dot while it is a beta.
  5. Open Scena, type your server's address (see the server steps below) and sign in.

Updates arrive through TestFlight: it tells you when a new build is ready. Each build lasts 90 days, so keep TestFlight's updates on.

LG TV (webOS 5 and newer, 2020 models onward)

While Scena waits for LG's store, it is installed on the TV by "sideloading". It is a one-off setup and then new builds go on in a minute. Download the latest LG build above first: it is a file ending in .ipk.

What you need

  • A free LG developer account: webostv.developer.lge.com (sign up, confirm your email).
  • The Developer Mode app on your TV (free, in the LG Content Store).
  • Node.js on your Windows PC or Mac: nodejs.org (the LTS version).
  • The webOS command-line tools: one command, below.
  • The TV and your computer on the same home network.

On the TV

  1. Open the LG Content Store, search for Developer Mode, and install it.
  2. Open Developer Mode and sign in with your LG developer account.
  3. Switch Dev Mode Status to ON and Key Server to ON. The TV restarts.
  4. Open Developer Mode again. Note the TV's IP address and the passphrase it shows.

On your computer

Open Terminal (Mac) or PowerShell (Windows). Do this part once:

npm install -g @webos-tools/cli
ares-setup-device --add tv -i "host=TV_IP_ADDRESS" -i "port=9922" -i "username=prisoner"
ares-novacom --device tv --getkey

Replace TV_IP_ADDRESS with the address from the TV. When asked, type the passphrase shown on the TV.

Then, for every build (go to the folder where you saved the .ipk):

ares-install --device tv app.scena.client_VERSION_all.ipk
ares-launch --device tv app.scena.client

Use the real file name for VERSION. Scena then appears in your TV's app list. Installing a newer build replaces the older one and keeps your sign-in.

Good to know

  • Developer Mode runs in sessions: open the Developer Mode app now and then and press Extend. Apps you have installed stay installed.
  • If the TV's IP address changes (after a router restart, say), run the ares-setup-device line again with the new address, using --modify instead of --add.
  • If install fails with a connection error, check that Dev Mode and Key Server are on, then try again.
  • On first launch, type your server's address, for example http://192.168.1.20:8096, and sign in.
  • Remote buttons: arrows, OK and Back. The Magic Remote pointer works too.
  • LG TVs cannot decode DTS audio. Scena converts it for you automatically (see what Scena does).
Server on Windows

What you need: Windows 10 or 11 (64-bit), and an always-on or often-on PC. Everything else, including ffmpeg, is included.

  1. Download Scena Server for Windows from the beta downloads above and run it.
  2. Windows may show "Windows protected your PC", because the beta installer is not signed yet. Click More info, then Run anyway.
  3. Follow the installer. It adds Scena to your Private network in the Windows firewall for you, so your TV and phone can find it. Nothing to open on your router.
  4. Scena starts with Windows, and its icon sits by the clock. Open http://localhost:8096 in your browser.
  5. Create the administrator account, then add your libraries (Settings, Libraries, Browse). The first scan takes a few minutes.
  6. In the app, type the server's address. It is shown in the server's Settings, for example http://192.168.1.20:8096.
Server on Mac

What you need: macOS 12 or later, Apple silicon or Intel. Download the version that matches your Mac.

  1. Download Scena Server for macOS from the beta downloads above and open it. Drag Scena Server into Applications.
  2. The first time, macOS may say it cannot check the app, because the beta is not notarised yet. In Applications, right-click Scena Server and choose Open, then Open again. (Or: System Settings, Privacy & Security, scroll down, Open Anyway.)
  3. If macOS asks whether Scena may accept incoming network connections, choose Allow. Your TV and phone need it.
  4. Scena lives in the menu bar and starts at login. Open http://localhost:8096 in your browser.
  5. Create the administrator account, then add your libraries. The first scan takes a few minutes.
  6. In the app, type the server's address. It is shown in the server's Settings, for example http://192.168.1.20:8096.

If something goes wrong

Beta software is provided as it is and may lose settings or stop working between builds. Keep your own media backed up (Scena only reads it, but it is good practice).